问题

不可访问的引导设备与VirtIO驱动程序和移动

  • 2021年6月25日
  • 0回答
  • 250的浏览量
l

长话短说，W2016服务器从高压转向高压。VirtIO驱动程序被安装，但是当机器在迁移到AHV后引导时，它是不可访问的引导设备。如果我经历了整个启动到恢复，删除驱动程序和注入驱动程序，它会启动，但这是大量的手动处理。

当MOVE迁移到AHV时，它启动为SATA驱动器，然后它似乎克隆磁盘，并将其重新连接为SCSI驱动器。它以SATA的形式引导到桌面，但随后以SCSI驱动器的形式引导到桌面，因此驱动程序问题是有意义的。问题是为什么驱动程序在迁移之前安装在HV机器上时不能工作，迁移之后也不能工作。

Long story short, W2016 server moving from HV to AHV. VirtIO drivers are installed but whenever the machine boots after migrating to AHV, it's bsods with inaccessible boot device. If I go through the whole booting to recovery, deleting the driver and injecting the driver, it boots up but thats a lot of manual handling.<\/p>

When MOVE migrates to AHV it boots up as SATA drive then it seems to clone the disk and reattaches it as a SCSI drive. It boots to the desktop as SATA but then as a SCSI drive it fails, so the driver issue makes sense. The issue is why the drivers are not working when they're installed on the HV machine before migration and don't work after.<\/p>","quoteUsername":"ListerOfSmeg","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote","Share":"Share"}}}">

0回答

做第一个回复的人!

回复


Baidu